Table of Contents
Advertisement
Step
2-6 Gels
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Action
3
Select a new GeneScan or Sequencing run. The Run window is
displayed.
4
Within the Run window perform the following:
a.
Select 96 from the Lanes pulldown menu.
Note
The correct run mode is then automatically selected.
b.
Select the plate check Pre-run and Run modules that
corresponds to your desired filter set from the appropriate
pulldown menus.
c.
Select the proper instrument file (matrix) for your run.
IMPORTANT
The tracker will not function unless the matrix file
was selected before starting the run.
d.
Select the proper sample sheet.
5
Perform the plate check, prerun, and run procedures as instructed
in the ABI P
377 DNA Sequencer User's Manual.
RISM
Advertisement
Table of Contents
Troubleshooting
