JASON Hydrotherapy KT525SR Owner's Manual

JASON Hydrotherapy KT525SR Owner's Manual

Hide thumbs Also See for KT525SR:

Advertisement

Quick Links

"TO BE REMOVED FOR USE BY THE OCCUPANT."
Jason
Hydrotherapy
®
8328 MacArthur Drive
North Little Rock, AR 72118
www.jasoninternational.com
MADE IN THE U.S.A.
INSTALLATION, OPERATION, AND MAINTENANCE
If the carton shows sign of damage, inspect
the product before accepting and describe the
problem on the Bill of Lading.
INSPECTION
Inspect the unit prior to installation. In the event of a
problem, DO NOT install the unit.
All components are factory assembled to the bath and the
unit is water tested and inspected prior to leaving Jason
International, Inc.
NOTE: Transportation and insurance from Jason's
factory are the buyer's responsibility.
Damage sustained in transit is the responsibility of
the carrier. If damage is discovered, the carrier must
be immediately notified in writing with a request for a
representative to inspect the unit. Failure of the carrier
to respond should be reported to the seller and carrier.
Always file a freight claim promptly.
The installer is responsible for insuring that the unit is
free from defects or shipping damage. In the event of a
problem, DO NOT install the unit.
Jason
Hydrotherapy is not responsible for damage that
®
might have been avoided by inspection or testing prior to
installation.
Damage to the unit during installation will not be covered
by warranty and is the responsibility of the installer.
OWNER'S RECORD
Dealer:
Date Purchased:
Date Installed:
Installer:
© 2021 Jason® Hydrotherapy • 501.771.4477
OWNER'S MANUAL
forma
and Designer Collection Baths
®
ALL WARRANTY CLAIMS ON ACRYLIC SURFACE
DAMAGE MUST BE MADE PRIOR TO INSTALLATION.
Inspect plumbing and bath surface for missing or damaged
components. Alert your dealer of any discrepancies.
To protect the unit from damage keep the bath in the
carton until ready for installation.
EQUIPMENT ACCESS
In accordance with Building Codes, service access to
all hydrotherapy bath equipment, controls and electrical
connections must be provided during installation
(Recommended minimum 28" x 17" [71 x 43 cm]).
Insufficient access will hinder repair and maintenance.
Warranty service will not cover costs of providing
equipment access.
The Specification Sheet for this bath contains additional
technical information. This sheet can be provided by your
dealer or accessed online at www.jasoninternational.com.
PLACE SERIAL NUMBER CARD WITH
PRODUCT CONFIGURATION IN THIS BOX
Page 1 of 28
49-1020-003
Date 05/2021
Customer Service : 800.255.5766

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KT525SR and is the answer not in the manual?

Questions and answers

Summary of Contents for JASON Hydrotherapy KT525SR

  • Page 1 “TO BE REMOVED FOR USE BY THE OCCUPANT.” Jason Hydrotherapy 49-1020-003 ® 8328 MacArthur Drive Date 05/2021 North Little Rock, AR 72118 www.jasoninternational.com MADE IN THE U.S.A. OWNER’S MANUAL forma and Designer Collection Baths ® INSTALLATION, OPERATION, AND MAINTENANCE If the carton shows sign of damage, inspect ALL WARRANTY CLAIMS ON ACRYLIC SURFACE DAMAGE MUST BE MADE PRIOR TO INSTALLATION.
  • Page 2 NOTES: © 2021 Jason® Hydrotherapy • 501.771.4477 Page 2 of 28 Customer Service : 800.255.5766...
  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS INSTRUCTIONS PERTAINING TO THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS. This manual contains information and instructions for proper operation and maintenance of your therapy bath. Failure to follow these instructions could result in personal injury, electrical shock, or fire. WARNING: When using this unit, basic precautions should always be followed, including the following: READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY DANGER: TO REDUCE THE RISK OF INJURY FOLLOW THESE PRECAUTIONS:...
  • Page 4: Consignes De Sécurité Importantes

    CONSIGNES DE SÉCURITÉ IMPORTANTES INSTRUCTIONS RELATIVES AU RISQUE DE FEU, CHOC ÉLECTRIQUE, OU DE BLESSURE. Ce manuel contient des informations et des instructions pour le bon fonctionnement et l’entretien de votre bain thérapeutique. Ne pas suivre ces instructions cela pourrait entraîner des blessures corporelles, un choc électrique ou un incendie. AVERTISSEMENT: Lors de l’utilisation de cet appareil, des précautions de base doivent toujours être suivies, y compris les suivantes: LIRE ET SUIVRE TOUTES LES INSTRUCTIONS ATTENTIVEMENT...
  • Page 5 Cautionary Warnings (English/French) ATTENTION: la temperature ambiante sous la baignoire où CAUTION: Ambient temperature under the bath where equip- l’équipement est installé ne doit pas dépasser 50°C. ment is installed must not exceed 122°F (50°C). AVERTISSEMENT : Toute modification de l’équipement n’est WARNING: Any modification to the equipment is not recom- pas recommandé...
  • Page 6 FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.) FEATURES, CONTROLS AND OPERATING INSTRUCTIONS INTRODUCTION FEATURES Jason offers the finest in soaking hydrotherapy baths but also offers the option for more hydrotherapy choices with This manual contains all of the information needed for Jason MicroSilk or AirMasseur therapy units.
  • Page 7 FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.) AIRMASSEUR FEATURES WHIRLPOOL FEATURES ® Jason’s AirMasseur hydrotherapy bath fills the bath with Jason’s Whirlpool hydrotherapy bath utilizes Perfect millions of warm air bubbles to create a blanket of rolling Pressure/Perfect Flow jets that are directed at key muscle movement, gently massaging your skin.
  • Page 8 FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.) STANDARD EDITION ELECTRONIC CONTROLS MicroSilk [MS] AirMasseur [AM] ® ® Whirlpool [WP] MicroSilk-AirMasseur [MA] MicroSilk-Whirlpool [MW] AirMasseur-Whirlpool [AW] ICONS POWER Icon LED Icon (Optional) WHIRLPOOL Icon PILLOW Icon (Optional WP, MW, AW) (WP, MW, AW) Blower SPEED Icon AIRMASSEUR Icon (AM, MA, AW)
  • Page 9: Standby Mode

    FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.) STANDARD EDITION OPERATING INSTRUCTIONS One main control touchpad mounted on the bath features several icons used by the bather to control the bath. This sec- tion will outline the functions of the system when a particular icon is pressed. If the icon is lit WHITE, then that particular option is available to operate.
  • Page 10 FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.) AirMasseur Icon MicroSilk Icon ® ® The AIRMASSEUR icon is used to activate the The MICROSILK icon is used to activate the ® blower and the 20-minute timer. MicroSilk unit and the 20-minute timer. ®...
  • Page 11 FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.) DIGITAL KEYPAD ELECTRONIC CONTROLS ICONS LED Icon HOME Icon WHIRLPOOL Icon PILLOW Icon (WP, MW, AW) (Optional WP, MW, AW) AIRMASSEUR Icon Blower SPEED Icon (AW, MA, AW) (AM, MA, AW) Blower MODE Icon MICROSILK®...
  • Page 12: Menu Instructions

    FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.) DIGITAL KEYPAD OPERATING INSTRUCTIONS Menu Instructions Use the arrows to navigate the different options available and select the check mark to choose that option. For example, press the button beside the up arrow to change from Product Test to the Temperature option. Select the check mark to enter the Temperature Menu.
  • Page 13 FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.) DIGITAL KEYPAD ELECTRONIC CONTROLS WHIRLPOOL Icon PILLOW Icon (optional) The PILLOW icon is used to activate the neck jets when The WHIRLPOOL icon is used to activate the the Jetted Neck Pillow option is ordered. This icon will whirlpool pump and the 20-minute timer.
  • Page 14: User Maintenance Instructions

    USER MAINTENANCE INSTRUCTIONS HUMIDITY SURFACE MAINTENANCE Area with minor scratches or dull surfaces can be restored WARNING: Avoid high humidity levels in your home. by applying commercially available plastic polish (i.e. No- Mold, mildew, fungi and bacteria which may be harm- vus Plastic Polish No.
  • Page 15: Level Installation

    INSTALLATION INSTRUCTIONS (cont.) INSTALLATION INSTRUCTIONS INSTALLATION 2. AirMasseur Ventilation (AM, MA or AW baths) ® A minimum ventilation opening of 2” x 4” [5x10cm] for the AirMasseur blower is required. It should be designed to 1. Finish Frame draw in indoor ambient air at a minimum of 72°F [22°C]. A finish frame under the shell rim should always be 3.
  • Page 16 INSTALLATION INSTRUCTIONS (cont.) 6. Integral Tile Lip Alcove Installation 7. Tile Flange After the bath has been leveled, confirm the height mea- 100% Silicone with mildew resistant properties should be surement of the underside of the flange deck in order to applied between the water resistant backer board and the install a 1”x2”...
  • Page 17 INSTALLATION INSTRUCTIONS (cont.) FIELD INSTALLATION OF THE REMOTE MOUNTING OF AIR BLOWER The Jason AirMasseur® system has been factory installed WHIRLPOOL PUMP ASSEMBLY following ETL/UL Standard safety guidelines. During in- The Jason Whirlpool system has been factory installed stallation, if remote mounting of the air blower is desired or following ETL/UL Standard safety guidelines.
  • Page 18 INSTALLATION INSTRUCTIONS (cont.) ELECTRICAL INSTALLATION These instructions are written assuming 60Hz, 120V pow- The pumps are supplied with an electrical bonding lug to er supply. Verify the electrical requirements of the bath allow connection of a solid copper bonding conductor be- unit before installation.
  • Page 19 INSTALLATION INSTRUCTIONS (cont.) WHIRLPOOL [WP] SYSTEM Additional Options Available: Standard Edition Bluetooth Sound Immersion: WP Pump (Included on Signature Edition) Optional Bluetooth Sound Immersion Transducers installed on bath. Bluetooth amp supplied Keypad and field installed. [IDU-264] TRANSDUCER J S O N Ncmi Pinc Mloi Drooidvlro Keypad Cable...
  • Page 20 INSTALLATION INSTRUCTIONS (cont.) AIRMASSEUR® [AM] SYSTEM Additional Options Available: Standard Edition Bluetooth Sound Immersion: Cmrzis (Included on Signature Edition) Optional Bluetooth Sound Immersion Keypad Transducers installed on bath. Bluetooth amp supplied [IDU-264] and field installed. TRANSDUCER Ncmi Pinc J S O N Mloi Drooidvlro Prv Vtie Keypad Cable...
  • Page 21 INSTALLATION INSTRUCTIONS (cont.) AIRMASSEUR®-WHIRLPOOL [AW] SYSTEM Additional Options Available: Standard Edition Bluetooth Sound Immersion: WP Pump (Included on Signature Edition) Cmrzis Optional Bluetooth Sound Immersion Keypad Transducers installed on bath. Bluetooth amp supplied [IDU-264] and field installed. Ncmi Pinc J S O N TRANSDUCER Mloi Drooidvlro Keypad Cable...
  • Page 22 INSTALLATION INSTRUCTIONS (cont.) MICROSILK® [MS] SYSTEM Additional Options Available: Standard Edition Bluetooth Sound Immersion: (Included on Signature Edition) MS Pump Optional Bluetooth Sound Immersion Transducers installed on bath. Bluetooth amp supplied Keypad and field installed. [IDU-264] TRANSDUCER J S O N Ncmi Pinc Mloi Drooidvlro Keypad Cable...
  • Page 23 INSTALLATION INSTRUCTIONS (cont.) MICROSILK®-WHIRLPOOL [MW] SYSTEM Additional Options Available: Standard Edition Bluetooth Sound Immersion: (Included on Signature Edition) WP Pump Optional Bluetooth Sound Immersion Keypad Transducers installed on bath. Bluetooth amp supplied and field installed. [IDU-264] MS Pump TRANSDUCER J S O N Ncmi Pinc Mloi Drooidvlro Keypad Cable...
  • Page 24 INSTALLATION INSTRUCTIONS (cont.) MICROSILK®-AIRMASSEUR® [MA] SYSTEM Additional Options Available: Standard Edition Bluetooth Sound Immersion: MS Pump (Included on Signature Edition) Optional Bluetooth Sound Immersion Transducers installed on bath. Bluetooth amp supplied Keypad and field installed. [IDU-264] TRANSDUCER J S O N Ncmi Pinc Mloi Drooidvlro Cmrzis...
  • Page 25 NOTES: © 2021 Jason® Hydrotherapy • 501.771.4477 Page 25 of 28 Customer Service : 800.255.5766...
  • Page 26: Troubleshooting Guide

    TROUBLESHOOTING GUIDE If you believe the unit to be within the warranty period, you must contact Jason Customer Service: 1-800-255-5766 with the bath’s Product and Serial numbers before work is started. These numbers can be found on the label on the front page of this manual and also adhered to the underside of the bath above the equipment.
  • Page 27 TROUBLESHOOTING GUIDE MICROSILK [MS, MA or MW] PUMP SYSTEM ® SYMPTOMS POSSIBLE CAUSES RECOMMENDED ACTION Pump operates, but no microbubbles a. Air intake clogged. a. Refer to installer/dealer. are injected into the water. Pump operates, but water is not being a.
  • Page 28 WARRANTY REGISTRATION: Register your product’s warranty online at www.jasoninternational.com. JASON® HYDROTHERAPY LIMITED WARRANTY Jason Hydrotherapy (Jason), warrants its baths to be free from defects in workmanship and materials as provided in the enclosed Warranty Statement and Warranty validation card. The pre-addressed warranty registration card MUST be filled out by the purchaser within thirty (30) days from purchase and mailed to Jason Hydrotherapy in order for the limited warranty to become effective.

This manual is also suitable for:

Kt530srKt630srKt530slKt630

Table of Contents