Table of Contents
Advertisement
Quick Links
"TO BE REMOVED FOR USE BY THE OCCUPANT."
Jason International, Inc.
8328 MacArthur Drive
North Little Rock, AR 72118
www.jasoninternational.com
InsTallaTIOn, OPeraTIOn, anD MaInTenanCe
If the carton shows sign of damage, inspect
the product before accepting and describe the
problem on the bill of lading.
INSPECtION
Inspect the unit prior to installation. In the event of a
problem, DO NOT install the unit.
All components are factory assembled to the bath and the
unit is water tested and inspected prior to leaving Jason
International, Inc.
If the carton shows sign of damage, inspect the product
before accepting and describe the problem on the Bill of
Lading.
NOTe: Transportation and insurance from Jason's
factory are the buyer's responsibility.
Damage sustained in transit is the responsibility of the
carrier. If damage is discovered,
CautION: DO NOt lIft OR haNDlE thE bath bY ItS PlumbINg.
OWNER'S RECORD
Dealer:
Date Purchased:
Date Installed:
Installer:
Jason International, Inc. • 501.771.4477
Owner's Manual
Integrity
airMasseur
®
Baths
®
the carrier must be immediately notified in writing with a
request for a representative to inspect the unit. Failure of
the carrier to respond should be reported to the seller and
carrier. Always file a freight claim promptly.
The installer is responsible for insuring that the unit is
free from defects or shipping damage. In the event of a
problem, DO NOT install the unit.
Jason International is not responsible for damage that
might have been avoided by inspection or testing prior to
installation.
Damage to the unit during installation will not be covered
by warranty and is the responsibility of the installer. ALL
WARRANTY CLAIMS ON ACRYLIC SURFACE DAMAGE
MUST BE MADE PRIOR TO INSTALLATION. Inspect
plumbing and bath surface for missing or damaged
components. Alert your dealer of any discrepancies.
To protect the unit from damage keep the bath in the
carton until ready for installation.
PlaCE SERIal NumbER CaRD WIth
PRODuCt CONfIguRatION IN thIS bOx
Page 1 of 9
49-1013-200
Date
04/11
Customer Service : 800.255.5766
Copyright © 2011 Jason International.
Advertisement
Table of Contents
Related Manuals for JASON Hydrotherapy Integrity Air Masseur A6060
Summary of Contents for JASON Hydrotherapy Integrity Air Masseur A6060
- Page 1 “TO BE REMOVED FOR USE BY THE OCCUPANT.” Jason International, Inc. 49-1013-200 8328 MacArthur Drive Date 04/11 North Little Rock, AR 72118 www.jasoninternational.com Owner’s Manual Integrity airMasseur Baths ® ® InsTallaTIOn, OPeraTIOn, anD MaInTenanCe If the carton shows sign of damage, inspect the carrier must be immediately notified in writing with a the product before accepting and describe the request for a representative to inspect the unit.
-
Page 2: Installation Instructions
72 x 36 x 20.5 36 x 17 in 44.8 B3672 183 x 91 x 52 91 x 43 cm 72 x 36 x 20.5 46.1 B3672 SL/SR 183 x 91 x 52 60 x 42 x 20.5 36 x 17 in 45.4 B4260 152 x 107 x 52... - Page 3 InsTallaTIOn InsTruCTIOns (cont.) InsTallaTIOn Jason offers a removable lateral skirt for most baths. The skirts are available in matching acrylic colors and each bath is provided with a cardboard bath well protector provide convenient access to bath equipment as well that should be kept in the unit during the installation and as an excellent finished appearance.
- Page 4 InsTallaTIOn InsTruCTIOns (cont.) Mortar is required when the subfloor is not smooth and Make sure the blower is well ventilated. The blower mount level; when additional sound insulation is desired; or when should be attached firmly to the floor. Piping between the the bath is installed in a drop-in application.
- Page 5 InsTallaTIOn InsTruCTIOns (cont.) actuator. A small bead of silicone may be added to the CleanIng air tubing connections to help prevent the tubing from Remove all loose debris. Construction plaster or disengaging.The air switch tubing must also be installed excess grout can be removed with the use of a wood to allow for a “drop loop”...
-
Page 6: Filling And Draining
OPeraTIng InsTruCTIOns, FeaTures, anD COnTrOls InTrODuCTIOn aIr On/OFF BuTTOn This manual contains all of the information needed for the The Air On/Off button (air switch activator) proper operation of this Jason Integrity AirMasseur bath. allows the user to turn the blower On and Off ®... -
Page 7: User Maintenance Instructions
user MaInTenanCe InsTruCTIOns HuMIDITY surFaCe MaInTenanCe Areas with minor scratches or dull surfaces can be WARNING: AvOID hIGh hUMIDITy levelS IN yOUR restored by applying commercially available plastic hOMe. MOlD, MIlDeW, FUNGI AND bACTeRIA WhICh polish (i.e. Novus Plastic Polish No. 2, available at your MAy be hARMFUl TO heAlTh ThRIve IN AReAS WITh Jason dealer), followed by an application of acrylic paste CONTINUeD hIGh hUMIDITy levelS;... -
Page 8: Troubleshooting Guide
TrOuBlesHOOTIng guIDe If the unit is within the warranty period, contact Jason Customer Service: 1-800-255-5766 with the bath’s Product and Serial numbers before work is started. The serial number can be found on the front page of this manual or on the small card adhered to the back of the bath just above the pump. -
Page 9: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS INStRuCtIONS PERtaININg tO thE RISk Of fIRE, ElECtRIC ShOCk, OR INJuRY tO PER- SONS. This manual contains information and instructions for proper operation and maintenance of your therapy bath. Failure to follow these instructions could result in personal injury, electrical shock, or fire. WaRNINg: When using this unit, basic precautions should always be followed, including the following: REaD aND fOllOW all INStRuCtIONS CaREfullY DaNgER:...