Before touching the device or hand-operating parts, wear a grounded electrostatic discharge (ESD) wrist strap. It can prevent the sensitive components from damage by the static electricity in the human body. MICROSENS GmbH & Co. KG, Kueferstr. 16, 59067 Hamm, Germany...
On (Green) linking Management Port MGMT Network management port is not Indicator linking Blink Data forwarding Link up Port Link Indicator Blink Port sending or receiving data Link down, no connection MICROSENS GmbH & Co. KG, Kueferstr. 16, 59067 Hamm, Germany...
Position the device the way that connected cables will not cause mechanical tension on the device or its attachment. SFP/SFP+ Transceiver Installation The switch is equipped with 48 times 100/1000 MbE SFP transceiver slots and four 10 GbE SFP+ transceiver slots MICROSENS GmbH & Co. KG, Kueferstr. 16, 59067 Hamm, Germany...
The switch startups after powering Note: To switch off the device, disconnect the power supply. Connecting to console The switch provides a serial RJ-45 console port. MICROSENS GmbH & Co. KG, Kueferstr. 16, 59067 Hamm, Germany...
Upload the firmware image file to the device by using the Web Manager. For further information please refer to the web manual of your device. MICROSENS Support For further questions please contact our support: E-mail: support@microsens.com Phone: +49 (0)2381 9452-345 (Mo. Fr., 7:30 AM 04:00 PM CET) MICROSENS GmbH & Co. KG, Kueferstr. 16, 59067 Hamm, Germany...
Page 8
52-Port 10G Multi Fiber L3 Switch 19" Disclaimer MICROSENS GmbH & Co. KG disclaims any liability for the correctness, completeness or quality of the information provided, fitness for a particular purpose or consecutive damage. Any product names mentioned herein may be trademarks and/or registered trademarks of their respective owners.
Need help?
Do you have a question about the MS400991M and is the answer not in the manual?
Questions and answers