Subscribe to Our Youtube Channel
Related Manuals for Microsens MS653410MX
Summary of Contents for Microsens MS653410MX
- Page 1 Quick Start Guide Commissioning the Ruggedized 19’’ Gigabit Ethernet Switch with 10G Uplink Ports v0.0.5...
- Page 2 This quick start guide describes the commissioning of the switch (mechanical handling) incl. connecting power supply and network link, resetting to factory settings and activating the network management access. For further documentation see the reference manual and the MICROSENS homepage under www.microsens.com. This guide will help you with ...
- Page 3 – Ring domain 0 enabled, role “Transit (Slave)” detected, error occurred. o Green blinking – Ring domain 0 enabled, role “Master” detected, no error. o Red blinking – Ring domain 0 enabled, role “Master” detected, error occurred. MICROSENS GmbH & Co. KG, Kueferstr. 16, 59067 Hamm, Germany...
- Page 4 Stop bits: 1 Parity bit: none Flow control: none Enter the credentials of the preset user (username: , password: , s. section 4) and click the admin admin button “Enter”. MICROSENS GmbH & Co. KG, Kueferstr. 16, 59067 Hamm, Germany...
- Page 5 (read/write), open a console session and enter the following commands: console#configure terminal console(config)#snmp-server server console(config)#snmp-server community public ro console(config)#snmp-server community private rw console(config)#exit Note: For information about enabling SNMPv3 please refer to the reference manual. MICROSENS GmbH & Co. KG, Kueferstr. 16, 59067 Hamm, Germany...
- Page 6 Firmware Updates and Further Information You have access to current firmware versions and further information once you have registered on our website. Registration In your internet browser open the address “www.microsens.com” and navigate to the page “Partner Login”. Follow the link “Please register here”.
- Page 7 All information in this document is provided ‘as is’ and subject to change without notice. MICROSENS GmbH & Co. KG disclaims any liability for the correctness, completeness or quality of the information provided, fitness for a particular purpose or consecutive damage.
Need help?
Do you have a question about the MS653410MX and is the answer not in the manual?
Questions and answers