Table of Contents
Advertisement
17.2
Replacement 1SS card
1. Disconnect the 230 V and the batteries.
2. Insert the 1SS replacement card.
3. Turn on the 230 V and connect the batteries.
4. Configure the panel again, see chapter 13 – Configuration of panel.
5. The system will be ready again after approx. 2 seconds.
Declaration of Conformity and Declaration of Performance
18
The smoke ventilation panels are manufactured and tested accordingly to the European requirements.
The total system is not to be put into service until a declaration of conformity for the total system has been made.
The "Declaration of Conformity" and the EN certificate are supplied with panel as separate documents.
24
Advertisement
Table of Contents
