Table of Contents
Advertisement
Standard
actuators
±24V
Examples with 4A power
consumption
a) 4 pcs. WMX 826-1
b) 2 sets of 2 pcs. WMX 826-2
c) 1 pcs. WMU 884-1
Cable monitoring
When using ±24V standard
actuators or non-WindowMaster
actuators and cable monitoring is
wanted an "end of line motor
module" type WSA 5xx must be
added in the last junction box.
Actuators are per default monitored.
MotorLink
®
actuators
Examples with actuators per
motor line
Ex. 1: 4 pcs. WMX 823-1
Ex. 2: 2 pcs. WMU 882-2
Ex. 3: 3 pcs. WMU 826-3
Allowed actuator combinations on a MotorLink
The motor line can be connected to one of the below shown combinations.
-1 (single): one window with one single window
actuator. Up to four windows each with one
single window actuator can be connected.
-2 (double): one window with two double window
actuators.
-3 (triple): one window with three triple window
actuators.
-4 (quad): one window with four quad window
actuators.
Cable monitoring
When using actuators with MotorLink
When the team-size does not match, an error is indicated on the diodes.
Connection of standard actuators on motor line X1 (with cable monitoring)
®
motor line
®
the actuators with MotorLink
®
are monitored by data communication.
13
Advertisement
Table of Contents
