Start Up And Test - Follett Horizon Elite 1412 Installation Instructions Manual

Table of Contents

Advertisement

Ice machine MUST be cleaned and sanitized prior to operation!
Consult Operation and Service Manual provided with ice machine for cleaning and sanitizing instructions.
6.1
Verify operation
• Turn dispenser power ON if applicable
• Three-phase scroll compressors will rotate in either direction, depending on power phasing.
Prolonged operation in reverse will result in insufficient lubrication. Determine the proper
rotation at start up by observing that the suction pressure drops and discharge pressure rises.
• Put a piece of ice on bin thermostat or hold a cup under the shuttle actuator on the bin/
dispenser to verify that the evaporator unit shuts OFF.
• After shut off, restart the ice machine
Note: After unit shuts off, pressures will equalize.
Ice Machine Model Number
F1412CU
Harmony, Horizon, Horizon Elite, Ice Manager, and Vision are trademarks of Follett Products, LLC.
Chewblet, RIDE and Follett are registered trademarks of Follett Products, LLC, registered in US.
NOTICE
Horizon Condenser Unit Compressor Amperage - Three Phase
ZF06KAE-TF5-118 (Copeland)
801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com
Condensing Unit

Start up and test

Running amps (+/- 10%)
RLA 6.3
Max continuous current: 11.6A
© Follett Products, LLC 2/23
6
01519131R00

Advertisement

Table of Contents
loading

Table of Contents