Start Up And Test; Verify Operation - Follett Horizon Elite 1010 Series Installation Instructions Manual

Ice machine MUST be cleaned and sanitized prior to operation!
Consult Operation and Service Manual provided with ice machine for cleaning and sanitizing instructions.
6.1

Verify operation

• Turn dispenser power ON if applicable
• Check current draw of compressor to verify correct electrical operation
• Put a piece of ice on bin thermostat or hold a cup under the shuttle actuator on the bin/
dispenser to verify that the evaporator unit shuts OFF; condensing unit pumps down and
shuts off.
• After shut off, restart the ice machine
Single Phase
Model Number
1010R
01075365
1410R
01075373
Three Phase
Model Number
1010R
01113125
1410R
01113133
REMOTE CONDENSING UNIT
NOTICE
Horizon Condenser Unit Compressor Amperage
Condensing Unit
AJA7490ZXDPN (Tecumseh)
AWA9513ZXDPN (Tecumseh)
Condensing Unit
AWA9490ZXTPN (Tecumseh)
LZT015M6CFIM (Larkin)

Start up and test

Running amps (+/- 10%)
7.4
13.7
Running amps (+/- 10%)
6.7
10.7
6
9