Table of Contents
Advertisement
4.1
Low voltage control (24 Vac)
The low voltage control (24 Vac signal wire) must be run and connected at the back of the ice machine
and to the condensing unit. Route low voltage wire through the upper knockout at the condensing unit
and secure with appropriate connector per NEC.
Follett suggests the following wire for the ice machine signal wire (2 conductor, 18 gauge thermostat
wire), but be sure to follow NEC guidelines:
Southwire: 553020507, Johnston Supply: G80-220, United refrigeration: UL1825
Ice Machine
10
Run 24 Vac signal
wire to connector,
then plug connector
into socket at ice
machine.
Low Voltage Control
Outdoor Condensing Unit
24 Vac signal wire
Run 24 Vac signal
wire to TB2 terminals
1 and 2 of condens-
ing unit.
REMOTE CONDENSING UNIT
4
Advertisement
Table of Contents
