Figure 1 - Toro 60216C Operator's Manual

It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on
any forest-covered, brush-covered, or grass-covered
land unless the engine is equipped with a spark
arrester, as defined in Section 4442, maintained in
effective working order or the engine is constructed,
equipped, and maintained for the prevention of fire.
The enclosed engine owner's manual is supplied
for information regarding the US Environmental
Protection Agency (EPA) and the California Emission
Control Regulation of emission systems, maintenance,
and warranty. Replacements may be ordered through
the engine manufacturer.
Tire Information—The DOT tire information is located
on the side of each tire. This information gives load
and speed ratings. Replacement tires should have the
same or better ratings; refer to
15) to ensure that the tires on your machine meet or
exceed the weight requirements of your machine.
WARNING
CALIFORNIA
Proposition 65 Warning
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Introduction
This machine is designed to mix mortar, plaster,
fireproofing material, grout, and other small-grained
Portland cement products. A vehicle equipped with
an appropriate pintle hitch or ball hitch can tow the
machine.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
You may contact Toro directly at www.Toro.com
for product safety and operation training materials,
accessory information, help finding a dealer, or to
register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
© 2018—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Specifications (page
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Important:
With your mobile device, you can
scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other
product information.
1. Model and serial number location
Model No.
Serial No.
2

Figure 1

Figure 1
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g248834