Table of Contents
Advertisement
WARNING
Oil may be hot after the engine has been run,
and contact with hot oil can cause severe
personal injury.
Avoid contacting the hot engine oil when you
drain it.
1.
Shut off the engine and wait for all moving parts
to stop.
2.
Disconnect the wire from the spark plug; refer to
Disconnecting the Spark-Plug Wire (page
3.
Place a drain pan under the oil-drain hole of the
engine
(Figure
40).
Figure 40
1. Oil-drain plug
2. Oil-drain hole
4.
Remove the drain plug and catch the oil in the
oil-drain pan
(Figure
5.
When the oil has drained completely, install the
drain plug with a new washer
Note:
Dispose of the used oil at a certified
recycling center.
6.
Remove the dipstick
pour oil into the fill hole until the oil reaches the
upper-limit mark (bottom edge of the oil-fill hole)
on the dipstick.
27).
3. Oil-drain pan
40).
(Figure
40).
(Figure
41) and slowly
1. Oil-fill hole
2. Dipstick
7.
Replace and secure the dipstick.
8.
Wipe up any spilled oil.
g019750
31
Figure 41
3. Oil-level upper limit
4. Oil-level lower limit
g028981
Advertisement
Table of Contents
