Electrical System Maintenance; Replacing The Rear-Facing Side Bulbs; Replacing The Side-Facing Bulbs; Replacing The Front Amber Bulbs - Toro 60216C Operator's Manual

Electrical System
Maintenance
Replacing the Rear-Facing
Side Bulbs
Note:
The left rear-facing bulb also illuminates
license plate.
1. Use a screwdriver to remove the 4 screws from
the large square lens on the light
Figure 53
2. Remove the lens
3. Push and twist the bulb counterclockwise to
remove it from the socket
4. Push a new 1157 bulb into the socket and then
twist it clockwise
5. Install the lens and the 4 screws
Replacing the Side-Facing
Bulbs
1. Use a screwdriver to remove the 2 screws from
the small rectangular lens on the side of the light
(Figure 54).
(Figure
(Figure 53).
(Figure 53).
(Figure 53).
(Figure
53).
2. Remove the lens
3. Pull the bulb out of the socket
4. Push a new 168 bulb into the socket
5. Install the lens and the 2 screws
Replacing the Front Amber
Bulbs
g020829
1. Using a screwdriver, remove the 2 screws from
the small rectangular, amber lens on the front
of the light
53).
2. Remove the amber lens
3. Pull the bulb out of the socket
4. Insert a new 193 bulb into the socket
5. Install the amber lens and the 2 screws
55).
37
Figure 54
(Figure 54).
(Figure
(Figure
(Figure 55).
Figure 55
(Figure 55).
(Figure
g020830
54).
(Figure 54).
54).
g024883
55).
(Figure 55).
(Figure