Symbols - Oracle SNMA-2 Safety And Compliance Manual

Safety Precautions
Do not directly connect this product to outdoor metallic communications cables. Always
■
connect the product to outdoor metallic communications cables using a protection device
that is designed for direct connection to outdoor metallic communications cables (such as
a switch or router), or use optical non-metallic communications cables upon leaving the
building.
Do not directly connect this product to outdoor power cables.
■
■
■

Symbols

The following symbols may appear in this book:
Caution -
Caution -
touched.
Caution -
personal health, follow the instructions.
Depending on the type of power switch your device has, one of the following symbols may be
used:
Applies AC power to the system.
On -
Removes AC power from the system.
Off -
Standby -
32 SPARC S7-2L Server Safety and Compliance Guide, Compliance Model No.: SNMA-2 • June 2016
For AC Power, connect the product only to an indoor power distribution system that
uses current-limiting circuit breakers for AC power.
For DC Power, connect the product only to earthed power systems that are completely
contained within one building.
There is a risk of personal injury and equipment damage. Follow the instructions.
Hot surface. Avoid contact. Surfaces are hot and may cause personal injury if
Hazardous voltages are present. To reduce the risk of electric shock and danger to
The On/Standby switch is in the standby position.