Safety Precautions
Rack System Warnings
The following warnings apply to Racks and Rack Mounted systems.
Caution -
equipment that will be mounted in the lowest part of the rack first, then the next higher systems,
etc.
Caution -
rack must be deployed.
Caution -
temperature does not exceed the product's ambient rated temperatures.
Caution -
should be made to the amount of air flow that is required for a safe operation of the equipment.
Caution -
equipment. The weight of some rack equipment may have altered the rack or library center of
gravity and could cause an overbalance/tip condition during a move.
Caution -
Listing, CSA or C-UL Certification, and is CE marked.
Laser Compliance Notice
Your Oracle product may contain Class 1M Laser Transceivers or a Class 1 Laser, as defined by
IEC 60825-1.
Caution -
specified in Oracle product documentation may result in hazardous radiation exposure. Do not
view laser beam directly with optical instruments.
CD and DVD Devices
The following caution applies to CD, DVD, and other optical devices.
36
SPARC S7-2L Server Safety and Compliance Guide, Compliance Model No.: SNMA-2 • June 2016
For safety, equipment should always be loaded from the bottom up. That is, install the
To prevent the rack from tipping during equipment installation, the anti-tilt bar on the
To prevent extreme operating temperature within the rack insure that the maximum
To prevent extreme operating temperatures due to reduced airflow consideration
Take adequate precautions when moving a rack or library that contains rack-installed
For tape libraries, ensure that the equipment to be installed in the rack has UL
Use of controls or adjustments or performance of procedures other than those
Need help?
Do you have a question about the SNMA-2 and is the answer not in the manual?