Advertisement
D-4
Desk Station V Plus User's Manual
II. Resource Maps
Under DOS/Win3.1x
Under Windows 95
The resource maps list the preassigned IRQ levels, DMA
channels and I/O port addresses. Because the system resources
are dynamically assigned during start up the Windows 95 Plug
and Play standard, the system configuration may change every
time the computer starts. The following tables are provided to tell
you what resources are available.
The resource map is comprised of the static resources plus the
TSETUP resource information.
Using resource information from TSETUP, HWSETUP and/or
Toshiba Acccess Panel (TAP) and the static resource information
will allow you to build a resource table for adding devices/cards.
Refer to the TSETUP section in the User's Guide for your
computer for instructions on viewing and changing system
resources for the following devices:
❖
VGA BIOS Address
❖
Communication Ports (Serial I/O and IRQ, IrDA I/O, IRQ
and DMA, Built-in modem I/O and IRQ, Bi-Directional
Parallel I/O, IRQ and DMA, EDP Parallel I/O, IRQ and
DMA)
❖
Sound System (WSS I/O, SBPro I/O, Synthesizer I/O,
WSS and SBPro IRQ, WSS and SBPro DMA, Control I/O)
❖
PCI Bus IRQ (not changeable)
❖
Disk Drives (HDD and CD-ROM for Desk Station V Plus
SelectBay and 5.25-inch Drive Bay)
The resource map is comprised of the static resources plus the
System Properties/Device Manager settings.
Using resource information from the System Properties/Device
Manager and static resource information will allow you to build a
resource table for adding devices/cards.
The change system resources in Windows 95, use the
Windows 95 Control Panel.
Advertisement
