Advertisement
Installing Expansion Cards
Preparing the Desk Station V Plus
This section describes how to install expansion cards in the Desk Station V
Plus. These instructions assume that you've already prepared the expansion
card according to the instructions in the section titled Configuration
Considerations, and according to the instructions in the documentation for
the expansion card.
The only tool you'll need for installing most expansion cards in the Desk
Station V Plus is a Phillips screwdriver. Refer to each card's documentation
for exceptions.
CAUTION: When disassembling or installing any parts in the Desk
Station V Plus, follow the procedures in this manual.
Follow these steps to install expansion cards in the Desk Station V Plus.
1 Disconnect the AC power cord and all external devices from the Desk
Station V Plus.
EMERGENCY
2 Set the Key-lock on the right side of the Desk Station V Plus to either the
Normal or Emergency position by turning the Key-lock counterclockwise.
NORMAL
BLOCK
3-9
Advertisement
