Advertisement
3-6
Desk Station V Plus User's Manual
Worksheet Contents
Filling in the Worksheet
The information on the worksheet may come in handy when you need to
know how you configured the expansion cards in the Desk Station V Plus. If
you call Toshiba Product Support, have this information available.
Fill in the date on the line at the top of worksheet.
Part one of the worksheet is for the three expansion slots. Check the type of
expansion card you are using, check the type of slot card device and fill in
the serial number of the card, the IRQ number and the DRQ number you
assign during installation. For more information on IRQ and DRQ, please see
the section "Configuration Considerations" on the next page.
Part two of the worksheet is for devices attached to the Desk Station V Plus's
ports. Identify the device in the left column. Where appropriate, check the
box to indicate which setting you used.
1 Check the appropriate boxes indicating the type of cards you plan to
install in the Desk Station V Plus on the first part of the worksheet.
2 Fill in the base I/O address for each card.
3 Note the IRQ (if applicable) for each card. Mark whether the IRQ is fixed
or changeable. Consult the card's documentation for this information.
4 Note the DRQ line (if applicable) for each card. Mark whether it is fixed
or changeable. Consult the card's documentation for this information.
5 Note any serial peripheral device(s) you plan to attach to the Desk Station
V Plus on the second part of the worksheet. Examples of such devices
include external modems and mice or other pointing devices.
If the device uses a special device driver, make a note of whether there is
a required IRQ. For example, MOUSE.SYS and MOUSE.COM (mouse
device drivers) generally have to use COM1 or COM2, each of which
have a required IRQ (IRQ4 and IRQ3, respectively).
5 Review the information you've entered on the worksheet. If necessary,
make changes to each card's setup so each device has a unique IRQ and a
unique DRQ.
6 Set each card's switches and/or jumpers to conform to the information on
your worksheet. You may need to consult each card's documentation.
NOTE:
Be sure to configure devices before you install them. For
example, if you're installing a diskette drive, make sure you
set the drive selection properly. Save your Setup Worksheet.
Having the information when you install additional cards
may save you much time and aggravation.
Advertisement
