Grizzly G0637HEP Manual page 44

52. Connect the vacuum hoses between the
vacuum manifold and the collection drum
vacuum ports with (4) 1
Figure 45–46).
Figure 46. Connecting the vacuum hose.
53. Secure the vacuum hose inside the upper
and lower stand legs with the (2) U-shaped
clips (see Figure 47).
Figure 47. Securing the vacuum hose to the
stand legs.
-30-
⁄ " hose clamps (see
1
4
54. Model G0637 only: Mount the control box
onto the lower stand brace with (3)
⁄ " hex bolts, (6) ⁄
3 3
4 8
16 hex nuts (see Figure 48).
Note: The remote control uses IR (infrared)
to communicate with the control box, and
must have direct line-of-sight to the control
box. Locate the control box with this in mind.
Figure 48. Model G0637 control box mounted.
55. Model G0638 only: Mount the control brack-
et onto the lower stand brace with (2)
x ⁄ " hex bolts, (4)
3
4
"-16 hex nuts (see Figure 49).
⁄
3
8
Figure 49. Model G0638 control box bracket
mounted.
Model G0637/G0638 (Mfd. Since 04/12)
3 ⁄ "-16 x
8
" flat washers, and (3)
3
⁄ "-16
3
8
⁄ " flat washers, and (2)
3
8
⁄ "-
8