Tektronix DPO2014 Instructions Manual page 8

Clear and Sanitize Procedures
Table 2: Nonvolatile Memory Devices for the DPO2000 and MSO2000 Series (cont.)
Type and minimum size
CMOS, CLOCK; SERIAL
REAL-TIME CLOCK,
CRYSTAL, 7 X 8 RAM, SPI,
3.3V; M41T93RMY, SO18.300
CMOS, EEPROM; 128 X 8,
SERIAL; 24C01A, SOIC8
CMOS, MICROCONTROLLER;
8-BIT, 32K BYTES ON-CHIP
FLASH, MC9S08AW32CPUE,
LQFP64
CMOS, EEPROM; 256 X 8,
SERIAL; 24C02, SO8.15
2
Function User modifiable
Real-time clock, with
Only by the
battery backup processor system
EEPROM: contains the N/A
front end board serial
number and calibration
information
Microcontroller with Only by the
FLASH: contains the processor system
front panel processor
code and power status
for soft power switch
EEPROM: contains N/A
the application module
firmware
DPO2000 and MSO2000 Series Declassification and Security Instructions
Data input
method Location
Acquisition board
N/A
Front End Board
N/A
N/A Front Panel Board
N/A DPO2000 and
MSO2000 application
module
To clear or sanitize
Not applicable; no user
data
Not applicable; no user
data
Not applicable; no user
data
Not applicable; no user
data