Stopping Engine - Echo Power Pruner PPT-2620/H Operator's Manual

OPERATION
2. Purge Bulb
Pump purge bulb (C) until fuel is
visible in the "Clear" fuel return
line. Pump bulb an additional 4
or 5 times.
3. Recoil Starter
Lay the unit on a flat area and
keep movable attachment parts
clear of all obstacles. Firmly
grip throttle handle and throttle
trigger lockout with left hand.
Rapidly pull recoil starter
handle/rope (D) until engine
fires.
Note: If engine does not start
after 5 pulls, use Cold
Start Procedure.

Stopping Engine

1. Throttle
Release throttle trigger and allow engine to return to idle before shutting
off engine.
2. Stop Switch
30
A
© 11/23 ECHO Incorporated
PPT-2620 / H
C
D
PPT-2620
X7502346700