Filing Standard Saw Chain - Echo Power Pruner PPT-2620/H Operator's Manual

PPT-2620 / H

Filing Standard Saw Chain

Level 2
Power Pruner
BAR P/N
Narrow Kerf
254 mm (10 in.)
narrow bar
P/N 10A4CD3739
305 mm (12 in.)
narrow bar
P/N 12A4CD3744
Regular
254 mm (10 in.)
regular bar
P/N 10A0CD3739
305 mm (12 in.)
regular bar
P/N 12A0CD3744
Check bar part number on your Power Pruner. Chain and guide bar
gauge size must be identical. Use bar and chain combinations shown
in table above.
Dull or damaged cutters will result in poor cutting performance,
increased vibration, and premature saw chain failure.
Always stop engine and disconnect spark plug wire before
servicing guide bar and saw chain. Always wear gloves when
filing saw chain, otherwise serious personal injury may result.
Use a 4.5 mm round file for a 0.043 in. gauge saw chain. Use a
1.
5/32 in. round file for 5/32 in. gauge saw chain.
X7502346700
© 11/23 ECHO Incorporated
®
Bar and Chain Combinations
CHAIN
CHAIN P/N
TYPE
90PX39CQ
90PX44CQ
91VXL39CQ
91VXL44CQ
MAINTENANCE
LINKS
39
90
44
39
91
44
PITCH GAUGE
0.375 in. 0.043 in.
0.375 in. 0.050 in.
45