Echo Power Pruner PPT-2620/H Operator's Manual page 28

OPERATION
2. Choke
Move choke lever (B) to COLD
START (
3. Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the
clear fuel tank return line. Pump
bulb an additional 4 or 5 times.
4. Recoil Starter
Lay the unit on a flat area and
keep movable attachment parts
clear of all obstacles. Firmly
grasp throttle handle and
throttle trigger lockout with left
hand and fully depress throttle
trigger to wide open position.
Rapidly pull recoil starter
handle/rope (D) until engine
fires (or maximum five [5]
pulls).
5. Choke
After engine fires (or 5 pulls),
move choke (B) to the RUN
( ) (open) position. Firmly
grasp throttle handle and
throttle trigger lockout with left
hand and fully depress throttle
trigger to wide open position.
Pull starter handle/rope until
engine starts and runs.
Release throttle trigger and
allow unit to warm up at idle for
several minutes.
28
) position.
PPT-2620 / H
PPT-2620 H
A
C
B
B
© 11/23 ECHO Incorporated
D
X7502346700