Echo Power Pruner PPT-2620/H Operator's Manual page 46

MAINTENANCE
2. Set round file in cutter at 30°
angle. One fifth (1/5) of the file
should be exposed above top
cutter edge.
3. Keep file horizontal in cutter and
file in one direction.
4. File until cutter top and side
bevel edges are sharp without
nicks.
5. Place depth gauge tool firmly on
top of cutter with 0.635 mm
(0.025 in.) slot and end against
front cutter raker. File cutter raker
with flat file until flush with top of
depth gauge.
6. Finish cutter sharpening by
rounding front raker edge with
flat file.
46
1/5
Depth gauge tool
© 11/23 ECHO Incorporated
PPT-2620 / H
30°
Keep this angle
90°
X7502346700