Starting Warm Engine - Echo Power Pruner PPT-2620/H Operator's Manual

Hide thumbs Also See for Power Pruner PPT-2620/H:
Table of Contents

Advertisement

PPT-2620 / H
Note: If engine does not start with choke in "RUN" position after 5
pulls, repeat instructions 2 - 5.
6.
Throttle Trigger
After engine warm-up, grip throttle handle and support handle. Depress
the throttle trigger lockout, and gradually depress throttle trigger to
increase engine RPM to operating speed.

Starting Warm Engine

The starting procedure is the same as Cold Start except DO NOT close the
choke, and do not hold throttle trigger fully depressed.
The attachment should not move at idle, otherwise serious
personal injury may result.
Note: If attachment moves,
readjust carburetor
according to "Carburetor
Adjustment" instructions
in this manual or see
your ECHO Dealer.
1.
Stop Switch
Move stop switch button (A)
forward away from the STOP
position.
X7502346700
© 11/23 ECHO Incorporated
A
A
OPERATION
PPT-2620
PPT-2620 H
29

Advertisement

Table of Contents
loading

Table of Contents