Contents; Assembly; Drive Shaft/Handle Assembly - Echo Power Pruner PPT-2620/H Operator's Manual

CONTENTS

CONTENTS
The ECHO product you purchased has been factory pre-assembled for your
convenience. Due to packaging restrictions, some assembly may be
necessary.
After opening the carton, check for damage. Immediately notify your retailer
or ECHO Dealer of damaged or missing parts. Use the contents list to check
for missing parts.
1 Power Head / Handle assembly
1 Drive Shaft Assembly
1 Cutting Attachment with Guide Bar & Saw Chain
1 Operator's Manual
1 Warranty Statement
1 Shoulder Harness
1 Guide Bar Cover

ASSEMBLY

Drive Shaft/Handle Assembly

1. Remove protective caps from
handle assembly.
2. Loosen clamping bolts (A) on
drive shaft.
3. Pull flexible drive shaft coupler
(B) 2-3 inches out of handle
assembly.
4. Align flexible drive shaft
coupler with drive shaft socket
and slide together until handle
assembly is fully seated into
drive shaft.
5. Tighten clamping bolts (A).
18
PPT-2620 / H
B
© 11/23 ECHO Incorporated
A A
X7502346700