Chapter 3 Keyboard Layout And Functions Specification - Veichi SI23 Manual

Chapter 3 Keyboard layout and functions specification

Keyboard Appearance
●
Key Function
●
Key Name
Menu key
Confirm/Shift
key
Up/down key
Run key
Stop/reset key
Enter menu while standby or running. Presses this key to return while modify
parameter. While standby or running, press for 1 sec to enter condition monitoring
interface.
Press to modify parameter while in menu interface. Press again to confirm after
modifying; Press this key for 1 Sec to shift digit, and long press to cycle. Each digit
flashes three time to shift to next digit.
Select parameter group in menu interface. Modify parameter in modify state. Modify
given frequency, ID given while at standby or monitoring state (While given frequency,
PID are set by keyboard and [F4.09] needs to be set.
While run/stop is controlled by keyboard, press this key, VFD forward runs, and the
indicator is always on. While reverse, the indicator sparks.
Machine stops if press it while run/stop is controlled by keyboard. Its efficiency range is
defined by [F4.08]. VFD resets if press it in fault state (no reset if fault is not solved).
18
SI23 Solar Pump VFD Manual
Function