In all the tables contained in this manual, Power rails are named with the following meaning:
®
VDD_IN: SMARC
module power input voltage. Derived directly from VIN coming from Power IN Connector CN3. VDD_IN value can be set by
Power In Voltage selector CN8 (par.2.3.3)
VDD_RTC: Low current RTC circuit backup power. 3V coin cell voltage coming from the RTC Coin Cell Battery holder CN2 for supplying the RTC clock on SMARC
module.
_RUN: Switched voltages, i.e. power rails that are active only when the board is in ACPI s S0 (Working) state. Examples:+3.3V_RUN, +5V_RUN.
_ALW: Always-on voltages, i.e. power rails that are active both in ACPI s S0 (Working), S3 (Standby) and S5 (Soft Off) state. Examples: +5V_ALW, +3.3V_ALW.
_DSW: Deep Sleep Well voltages, i.e. power rails that are derived directly from VIN coming from Power IN Connector CN3. Examples: +3.3V_DSW, +1.8V_DSW.