Cleaning and care
RISK OF ELECTRIC SHOCK!
►
Always remove the mains power plug before cleaning the appliance!
WARNING – RISK OF INJURY!
►
Allow the appliance to cool down before cleaning it . Risk of burns!
CAUTION – PROPERTY DAMAGE
►
When cleaning the surfaces use neither abrasive or chemical cleaners,
nor sharp or scratchy objects .
■
Empty the water tank 8 after every use .
■
After each use, remove the pad 6/o from the steam foot 5 and wash it out .
■
Note the following washing instructions when you wash the pad 6/o in
the washing machine:
■
If necessary, wipe the appliance with a damp cloth . For stubborn soiling use
a mild detergent on the cloth .
Maintenance/changing the filter
After 4–6 months or approximately 100 cleaning cycles (one cycle corresponds
to one water tank filling), you will need to change the filter 7 . Please contact
our Service Department for replacement filters .
RISK OF ELECTRIC SHOCK!
►
Before changing the filter 7, always pull out the mains plug!
1) To remove the filter 7, first remove the water tank 8 from the appliance .
2) Pull the filter 7 upwards out of the appliance .
3) Insert the new filter 7 .
4) Replace the water tank 8 .
■
12
│
GB │ IE │ NI │ CY
Wash at max . 60°C
Do not tumble dry
Do not iron
SDM 1500 C2