After Using The Steam Brush; Cleaning And Care; Descaling - Silvercrest SDRB 1000 B1 Operating Instructions Manual

♦ If your clothes are heavily creased, use the
steam function by pressing the steam burst but-
ton 8 . To produce steam, set the temperature
control 3 to ••• or higher .
♦ If the heat-up indicator lamp 5 lights up during
operation, do not press the steam blast button 8
again: wait a few seconds until the heat-up
indicator lamp 5 goes out .
♦ Only repeat pressing the steam burst button 8
until the heat-up indicator lamp 5 lights up or
water drips from the ironing sole 0 . Wait until
the heat-up indicator lamp 5 goes out before
initiating another burst of steam .
NOTE
► If you press the steam burst button 8 while
the heat-up indicator lamp 5 is illuminated,
the appliance will produce condensation
instead of steam, and water will drip from the
ironing sole 0 .
♦ If the water tank runs dry during operation 1,
pull the mains plug 7 before refilling it .
♦ To set the appliance down briefly during opera-
tion, unfold the stand 9 to the front and lean
the appliance on it . To resume use of the appli-
ance, simply fold the stand 9 back to the rear .

After using the steam brush

♦ Set the temperature control 3 to "MIN" .
♦ Always disconnect the plug 7 from the mains
power socket after use .
♦ Empty the water tank 1 by opening the filler
opening 2 of the water tank 1, turning the ap-
pliance upside down and swinging it gently .
SDRB 1000 B1

Cleaning and care

WARNING – RISK OF INJURY!
► Always disconnect the mains plug 7 before
cleaning the appliance . There is a risk of
electric shock! Allow the appliance to cool
down . Risk of burns!
CAUTION
► Do not use aggressive cleaning agents . These
may damage the surfaces .
♦ Clean the housing with a soft, dry cloth only .
♦ Clean the metal parts of the appliance with a
damp cloth and a mild, non-scouring detergent .
♦ To clean the ironing sole 0, wipe it with a
damp cloth and a small amount of dish soap .

Descaling

The appliance must be descaled regularly to main-
tain its maximum performance . The frequency of
descaling depends on the quality of the water and
the frequency with which the appliance is used .
We recommend that you descale the appliance
either once a year or after 50 hours of total use .
We recommend descaling immediately, however,
if you notice that the appliance is generating less
steam .
NOTE
► You can do this with a regular descaling
agent containing citric acid .
Also observe the instructions for the descaling
agent .
1) Ensure that the appliance has completely
cooled down .
2) Add the descaling agent to the water tank 1 .
3) Insert the plug 7 into a properly installed and
grounded wall socket .
4) To produce steam, set the temperature control 3
to ••• or higher . The heat-up indicator lamp 5
lights up . As soon as the selected temperature
has been reached, the heat-up indicator lamp 5
goes out .
GB │ IE│ 9 ■