User Registration - Fujitsu ApeosPrint C4030 Reference Manual

Note
 When you use an Active Directory server, the authentication information saved on the Active Directory
server is copied and saved in the machine.
Under > [Device] > [Authentication/Accounting] > [Accounting] > [Authentication/Accounting
Settings], set [Off], or [Local]. When the authentication type is the remote account, accounting
setting is arbitrary.
Also, under > [Device] > [Authentication/Accounting] > [Authentication/Security Settings] >
[Authentication], set as follows.
[Authentication/Accounting Settings]
[User Details
Setup]
Active Directory Server Settings
If you use the authentication information of the Active Directory Server, set the Active Directory
Server.
Set under > [Device] > [Network Settings] > [Remote Authentication Server Settings] on the
control panel.
 [Attribute of Login User Name]: Used as the User ID.
Note
User Name cannot be set on the control panel or Internet Services. The "displayName" attribution of the

Active Directory server is acquired and set to the user information.

User Registration

If the user who has been registered with the machine uses this feature, register the user information
such as the user ID and password on the machine using the control panel or Device Setup.
Note
Notify users their ID and password, and that the authentication destination is "local".

System Administrator's Information Settings
Set the information of a system administrator with Smart Card Registration.
Note
If you change [System Administrator ID] or [System Administrator Password] on Setting Screen on the

machine, also change this service's settings. If not, this service may not run properly.
1.
Log in to Administrator Mode with the control panel of the machine.
2.
Tap on [Smart Card Registration].
Item
[Use of IC Card]
[Account Auto
Setup for Card
Login]
[IC Card Link
Mode]
Required Settings
[Local] or [Remote]
[On]
[Enabled]
Note
Set this item when the login type is the local account.

[App Access] is set when you control the access of guest

users.
[No Password Required]
Note
 Set this item when the login type is the remote account.
2.5 Smart Card Registration
27