Fujitsu ApeosPrint C4030 Reference Manual page 185

Item
Blank paper ejection
Note
 This is not reflected
if extension
command is sent.
Print digit range
Image enhancement
Character grade
Reduced character
Page length
1 inch perforation
skip
Paper supply position
CR function
HP-GL mode
Hard Clip
Item Number
ESC PCL HP
51 - -
52 - -
53 213 163
55 - -
56 - -
58 - -
59 - -
60 - -
61 - -
- - 150
- - 151
Specification value
[0]: None
[1]: Yes
Note
 You can specify the blank paper ejection.
If "None" is selected, a blank page is not generated

in 2 page print or 2 sided print.
 Blank paper is ejected if there is space created with
external fonts or white objects even if "None" is
selected.
[0]: Standard
[1]: Extension
Note
 You can extend the right margin position.
If the right margin position is specified with a

command, the position becomes the right edge.
[0]: OFF
[1]: ON
[0]: High grade
[1]: Draft
[0]: None
[1]: Yes
Note
 Characters can be reduced if alphanumerics are
printed.
[0]: 11 inches
[1]: 12 inches
[0]: None
[1]: Yes
Note
 You can have 1 inch between each page.
This specification is enabled only if "No cut sheet

feeder" is specified in "Paper position".
[0]: 8.5 mm
[1]: 22 mm
[0]: Return
[1]: Return line break
Note
This is not reflected if extension command is sent.

 This affects the print result of 8 bit dot image print
command.
[0]: HP-GL
[1]: HP-GL/2
Note
This affects IW, OW, and UC commands.

 If printing HP-GL/2 commands not including BP
commands, specify "HPGL/2".
[0]: Standard
[2]: Paper
185
10.2 Emulation