Fujitsu ApeosPrint C4030 Reference Manual page 176


[Zoom Mode]: [Coordinate Area], [Zoom]: ON
Image is reduced/enlarged within the printed area and printed.
 [Zoom Mode]: [Coordinate Area], [Zoom]: OFF
Image is printed in the actual size.
Due to this, areas larger than the paper size are not printed.
How to determine the document size
1.
The largest value among the following values is added as the margin to the object area
determined in [Area Determine Mode].
 Character size specified within the page
 Default character size
 Half of specified pen width
2.
"Object area determined in the area determination mode" + "added margin" - "specified paper
margin" will be the drawn object area.
3.
If [Zoom Mode] is [Paper Size], the document size is determined based on the drawn object area.
If [Zoom Mode] is [Coordinate Area], the document size is determined based on the starting point of
the drawn object area.
176
10 Appendix
Paper size
Printable area
Object area determined in "Area Judgement Mode"
Drawn object area ( = Print area)
Paper size
Printable area
Object area determined in "Area Judgement Mode"
Drawn object area ( = Print area)