Table of Contents
Advertisement
Item
[Invalid Login Settings]
[Password Policy]
[Password for Control
Panel Login]
[Password for IC Card
Login]
[Minimum Password
Length]
[Maximum Password
Length]
[Authentication from
External Services]
[Charge/Private Print
Settings]
[Receive Control]
[Control by Job
Login Results]
[Save as Private
Charge Print Job]
[Save as Charge
Print Job]
Sets this setting so that invalid operation is not performed through
impersonation. Sets the number of attempts until access is denied
for the [Maximum Failed Attempts], so that access is denied if there
are consecutive failures in authenticating the same user ID.
Note
When the machine is restarted, the number of failed attempts is reset.
When setting, set [Maximum Login Attempts - System Administrator]
or [Maximum Login Attempts - Local User] to [On].
Restart the machine to cancel the access denied state.
Maximum login attempts for local users can be set in the case of login
to local accounts.
Enables input of a password when a user uses the machine.
If set to [On], the [Password] for [Create/View User Accounts] is
enabled.
If set to [Off], password input is not required, even if a password is
specified with the above setting.
Enables input of password when the administrator or user performs
IC Card login for log in to local accounts.
Specifies minimum password length.
Specifies maximum password length.
Set whether to accept authentication that does not involve login
operations such as print jobs when the set password no longer
satisfies the requirements as a result of changing the password
security strength.
Sets for control of the Charge Print or Private Charge Print.
Sets how to handle received print jobs.
Sets handling of jobs for, respectively, [Job Login Success], [Job
Login Failure] and [Job Without User ID] when [Printer] of [App
Access] is set to [Locked] using the authentication/accounting
feature.
Saves all jobs with user ID attached as private charge prints,
regardless of whether the authentication feature is used or not. This
sets handling of jobs for, respectively, [Job Without User ID] and
[Non-PJL Command Jobs].
Saves all received jobs as charge prints, regardless of whether the
authentication feature is used or not.
Description
5.6 [Authentication/Accounting]
111
Advertisement
Table of Contents
