ICON Health & Fitness NordicTrack Z 1300i User Manual page 11

4. Have a second person hold the Right Upright
(90) against the Base (94) as shown. Make
sure not to pinch the Upright Wire (81).
Next, hold a Wheel (25) inside the Base (94).
Insert a 3/8" x 1 3/4" Screw (62) with a 3/8" Star
Washer (13) through the Base and the Wheel,
and partially tighten the Screw into the Right
Upright (90); do not fully tighten the Screw
yet.
Next, insert two 3/8" x 2 1/4" Screws (7) with
two 3/8" Star Washers (13) and a 3/8" x 1 1/4"
Screw (63) with a 3/8" Star Washer (13) into the
Right Upright (90), and partially tighten the three
Screws into the Base (94); do not fully tighten
the Screws yet.
Attach the Left Upright (not shown) and the
other Wheel (not shown) in the same way.
Note: There are no wires on the left side.
5. Remove and save the four indicated 5/16" x
3/4" Screws (4).
Next, identify the Left and Right Base Covers
(82, 83). Slide the Left Base Cover onto the Left
Upright (89), and slide the Right Base Cover
onto the Right Upright (90). Do not press the
Base Covers into place yet.
4
94
13
63
5
4
89
82
11
7
13
81
62
13
90
25
4
90
83