ICON Health & Fitness NordicTrack Z 1300i User Manual page 14

10. Insert the Upright Wire (81) through the
two indicated looped ties (I) on the console
assembly (F).
Connect the Upright Wire (81) to the con-
sole wire (J). The connectors should slide
together easily and snap into place. If they
do not, turn one connector and try again. IF
YOU DO NOT CONNECT THE CONNECTORS
PROPERLY, THE CONSOLE MAY BECOME
DAMAGED WHEN YOU TURN ON THE
POWER. Then, remove the wire tie from the
Upright Wire.
11. Tighten two #8 x 1" Pan Head Screws (98) into
the bottom of the console assembly (F) in the
locations shown.
12. Identify the Right and Left Trays (27, 36).
Attach the Trays (27, 36) to the Console Base
(64) with eight #8 x 1/2" Screws (1); do not
overtighten the Screws.
10
F
81
I
11
12
27
1
14
J
I
F
98
36
64
1