Table of Contents
Advertisement
Network Bullet Camera·Quick Start Guide
No.
6
7
8
9
10
11
12
13
The standard power supply is 12V DC or 24V AC, please make sure
your power supply matches with your camera.
Press RESET about 10s when the camera is powering on or
rebooting to restore the default settings, including the user name,
password, IP address, port No., etc.
Micro SD Card Installation
1.2
This series of camera supports micro SD card installation. Please
follow the steps below to install the micro SD card.
1. Loosen the two lock screws at the bottom of the bullet camera,
and then remove the slot cover.
Description
Power Cable Interface
Alarm Cable Interface
Video Cable Interface
Audio Out
Audio In
Reset Button
Micro SD Card Slot
Serial Port
10
Advertisement
Table of Contents
