Mitsubishi Heavy Industries FDT200VSAWPVH Service Manual page 144

FRESH AIR INTAKE (Location for installation) FOR FDTC
At the time of installation use the duct hole (cut out) located at the positions shown in follwing diagram, as and
when required.
If the temperature conditions of intake outdoor air do not satisfy, process the outdoor air
before intaking.
Heating
Cooling
Fresh air intake
Detail drawing of fresh air intake
■Fresh air intake amount & static pressure characteristics
FDTC50VH, 60VH
Cut out hole
150
Standard
100
50
0
0.0 0.5 1.0
Introduced outdoor air flow [m
143
-
Cut out
Detail of cut out
In case of an option OA spacer
One set duct joint Two sets duct joint
1.5 2.0 2.5
3 /min]
-
'21 • PAC-SM-383
3.0