Table of Contents
Advertisement
PROBLEM
Dryer not draining
Dryer is beeping
and displaying
a code
Water coming from
under the dryer
Water in drum at
end of cycle
TROUBLESHOOTING
POSSIBLE CAUSES
Drain hose not connected
to the water tank.
Water tank not correctly
in place.
Drain hose or drain blocked
or damaged.
Dryer has a fault.
Water tank not correctly
in place.
Water tank is full.
Water tank may be damaged.
Drain hose not connected
to the water tank.
Drain hose or drain blocked
or damaged.
Drain hose has slipped
out of the drain.
Dryer door not closing
properly, affecting the seal.
Inlet hose not
correctly tightened.
Water tank is full.
Environmental conditions
may be affecting operation.
WHAT TO DO
Ensure the drain hose is connected
correctly. Refer to installation guide.
Ensure the water tank is correctly
in place.
Check drain hose (if connected)
and drain for blockages or damage.
Try turning the dryer off and waiting
one minute before turning it back
on. If the fault code persists contact
Customer Care. Refer to 'Fault codes'.
Ensure the water tank is correctly
in place.
Ensure the water tank is empty. Refer
to 'Water tank'.
Check the water tank for any signs
of damage.
Ensure the drain hose is connected
correctly. Refer to installation guide.
Check drain hose (if connected)
and drain for blockages or damage.
Ensure the drain hose is securely
fixed in place. Drain hoses can move
or get displaced, which may lead to
water draining onto the floor.
Ensure there is nothing obstructing
the door opening and that the dryer
door is closed properly.
Check inlet hose and tighten
connection if necessary. Refer to
installation guide.
Ensure the water tank is empty. Refer
to 'Water tank'.
In particularly hot, humid or cold
conditions water may re-condense in
the drum or on the inside of the door.
33
Advertisement
Table of Contents
