Emptying The Water Tank - Fisher & Paykel DH9060H1 User Manual

Heat pump clothes dryer
Hide thumbs Also See for DH9060H1:
Table of Contents

Advertisement

During drying cycles, water is collected in the water tank at the top left of the dryer. Empty
the water tank after every load.
1
2
Never run the dryer without the water tank in place unless the drain hose has been installed.
You do not need to empty the water tank if you have set up the drain hose to drain
the water automatically. Refer to the installation guide for instructions on installing the
drain hose.

EMPTYING THE WATER TANK

Use the handle to pull the water tank out.
Keep the tank level when removing to
prevent water from spilling.
Empty the water tank then replace.
Ensure the water tank is correctly in place
before running another cycle.
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dh9060hg1

Table of Contents