Technical Specifications - Matco Tools MP200STDVI Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

- Consult your doctor before using any electric arc welder or cutting device.

- Keep people with pacemakers away from your welding area when welding.

- Do not wrap cable around your body while welding.

- Wrap MIG gun and ground cable together whenever possible.

- Keep MIG gun and ground cables on the same side of your body.

Shielding Gas Cylinders Can Explode

High pressure cylinders can explode if damaged, so treat them carefully.

- Never expose cylinders to high heat, sparks, open flames, mechanical shocks or arcs.

- Do not touch cylinder with MIG gun.

- Do not weld on the cylinder.

- Always secure cylinder upright to a cart or stationary object.

- Keep cylinders away from welding or electrical circuits.

- Use the proper regulators, gas hose and fittings for the specific application.

- Do not look into the valve when opening it.

- Use protective cylinder cap whenever possible.

1.5 Proper Care, Maintenance and Repair

- Always have power disconnected when working on internal components.

- Do not touch or handle PC board without being properly grounded with a wrist strap. Put PC board

in static proof bag to move or ship.

- Do not put hands or fingers near moving parts such as drive rolls of fan.

USE AND CARE



Do not modify this unit in any way. Unauthorized modification may impair the function and/or

safety and could affect the life of the equipment. There are specific applications for which this

unit was designed.



Always check for damaged or worn out parts before using this unit. Broken parts will affect

the operation. Replace or repair damaged or worn parts immediately.



Store idle. When this unit is not in use, store it in a secure place out of the reach of children.

Inspect it for good working condition prior to storage and before re-use.