Debounce Duration
This parameter sets the debounce duration after a trigger press. When the debounce time expires, the scanner triggers a
decode session. The default setting is 10ms.
Set the Debounce Duration to 20ms:
1.
2.
3.
4.
5.
49
Scan the Enter Setup barcode.
Scan the Debounce Duration barcode.
Scan the numeric barcodes "2" and "0" from the "Digit Barcodes" section in Appendix.
Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
Scan the Exit Setup barcode.
Debounce Duration
Enter Setup
** Exit Setup