Enter Setup
Use of Programming Barcodes
Scanning the Enter Setup barcode can enable the scanner to enter the setup mode. Then you can scan a number of
programming barcodes to configure your scanner. To exit the setup mode, scan the Exit Setup barcode or a non-
programing barcode, or reboot the scanner.
Exit Setup
Programming barcode data (i.e. the characters under programming barcode) can be transmitted to the host device. Scan
the appropriate barcode below to enable or disable the transmission of programming barcode data to the host device.
Do Not Transmit Programming Barcode Data
** Exit Setup
Enter Setup
Transmit Programming Barcode Data
24