Trigger Slope; Trigger Duration - Newland FM515 Series User Manual

Enter Setup

Trigger Slope

Positive Slope

Trigger Duration

This parameter sets the trigger duration during a decode session. Within trigger duration, the decode session continues
until a barcode is decoded or you release the trigger. When it is set to 0, the time is infinite. This feature is only applicable
to the Level mode.
Set the Trigger Duration to 1000ms:
1. Scan the Enter Setup barcode.
2. Scan the Trigger Duration barcode.
Scan the numeric barcodes "1", "0", "0" and "0" from the "Digit Barcodes" section in Appendix.
3.
Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
4.
5. Scan the Exit Setup barcode.
** Exit Setup
Trigger Duration
Negative Slope
48