Table of Contents
Advertisement
Set Length Range for AIM 128
The scanner can be configured to only decode AIM 128 barcodes with lengths that fall between (inclusive) the minimum
and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Set the Minimum Length
If minimum length is set to be greater than maximum length, the scanner only decodes AIM 128 barcodes
with either the minimum or maximum length. If minimum length is same as maximum length, only AIM 128
barcodes with that length are to be decoded.
Set the scanner to decode AIM 128 barcodes containing between 8 and 12 characters:
1.
2.
3.
4.
5.
6.
7.
8.
91
Scan the Enter Setup barcode.
Scan the Set the Minimum Length barcode.
Scan the numeric barcode "8" from the "Digit Barcodes" section in Appendix.
Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
Scan the Set the Maximum Length barcode.
Scan the numeric barcodes "1" and "2" from the "Digit Barcodes" section in Appendix.
Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
Scan the Exit Setup barcode.
Enter Setup
Set the Maximum Length
** Exit Setup
Advertisement
Table of Contents
