Table of Contents
Advertisement
Example: Program a Format_0 data format using formatter command type 6, Code 128 containing 10 characters applicable,
send all characters followed by "A".
1. Scan the Enter Setup barcode
2. Scan the Add Data Format barcode
3. Scan the 0 barcode
4. Scan the 6 barcode
5. Scan the 9 barcode three times
6. Scan the barcodes 002
7. Scan the barcodes 0010
8. Scan the alphanumeric barcodes F141
9. Scan the Save barcode
To streamline the programming process, you may as well generate a batch barcode by inputting the command (e.g.
@DFMADD069990020010F141;) used to create a data format. See the "Use Batch Barcode" section in Chapter 9 to learn
how to put a batch barcode into use.
When creating multiple data formats sharing a label, the formats are separated from each other by a vertical bar (|) in the
batch command, e.g. @DFMADD069990029999F141|069990039999F142|169990049999F143;.
95
Enter the Setup mode
Add a data format
Select Format_0 as the label
Select formatter command type 6
All interface types applicable
Only Code 128 applicable
Only a length of 10 characters applicable
Send all characters followed by "A" (HEX: 41)
Save the data format
Enter Setup
** Exit Setup
Advertisement
Table of Contents
