Menu System - Nibe F470 Installer Manual

Exhaust air heat pump
Hide thumbs Also See for F470:
Table of Contents

Advertisement

Menu system

When the door to the heat pump is opened, the menu
system's four main menus are shown in the display as
well as certain basic information.
Outdoor
temperature
Indoor temperature - (if room sensors are installed)
INDOOR CLIMATE
HOT WATER
SERVICE
HEAT PUMP
Temporary lux (if activated)
MENU 1 - INDOOR CLIMATE
Setting and scheduling the indoor climate. See informa-
tion in the help menu or user manual.
MENU 2 - HOT WATER
Setting and scheduling hot water production. See inform-
ation in the help menu or user manual.
MENU 3 - INFO
Display of temperature and other operating information
and access to the alarm log. See information in the help
menu or user manual.
MENU 4 - HEAT PUMP
Setting time, date, language, display, operating mode
etc. See information in the help menu or user manual.
MENU 5 - SERVICE
Advanced settings. These settings are not available to
the end user. The menu is visible when the Back button
is pressed for 7 seconds when you are in the start menu.
See
page
49.
44
Chapter 7 | Control - Introduction
Hot water temp.
Information about
operation
INFO
Estimated amount of hot water
SYMBOLS IN THE DISPLAY
The following symbols can appear in the display during
operation.
Symbol
Description
This symbol appears by the information sign
if there is information in menu 3.1 that you
should note.
These two symbols indicate whether the
compressor or addition is blocked in F470.
These can, for example, be blocked depend-
ing on which operating mode is selected in
menu 4.2, if blocking is scheduled in menu
4.9.5 or if an alarm has occurred that blocks
one of them.
Blocking the compressor.
Blocking additional heat.
This symbol appears if periodic increase or
lux mode for the hot water is activated.
This symbol indicates whether "holiday
setting" is active in 4.7.
This symbol indicates whether F470 has
contact with NIBE Uplink.
This symbol indicates the actual speed of
the fan if the speed has changed from the
normal setting.
This symbol is visible in installations with
active solar accessories.
NIBE F470

Advertisement

Table of Contents
loading

Table of Contents