Forwarding; Virtual Servers - TP Link TL-WR841N User Manual

Wireless n router.

Delete.

Modify the information.

Click the Save button.

Click the Enable/ Disabled All button to make all entries enabled/disabled

Click the Delete All button to delete all entries

Click the Next button to go to the next page and Click the Previous button to return the previous

page.

4.8

Forwarding

Figure 4-23 The Forwarding menu

There are four submenus under the Forwarding menu (shown in Figure 4-23): Virtual Servers,

Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the

corresponding function.

Choose menu "Forwarding→Virtual Servers", you can view and add virtual servers in the next

screen (shown in Figure 4-24). Virtual servers can be used for setting up public services on your

LAN, such as DNS, Email and FTP. A virtual server is defined as a service port, and all requests

from the Internet to this service port will be redirected to the computer specified by the server IP.

Any PC that was used for a virtual server must have a static or reserved IP Address because its

IP Address may change when using the DHCP function.

Service Port - The numbers of External Ports. You can type a service port or a range of

service ports (in XXX – YYY format, XXX is the start port number, YYY is the end port

number).

TL-WR841N/TL-WR841ND

Figure 4-24 Virtual Servers

Wireless N Router

Table of Contents

Show quick links

Table of Contents

Tl-wr841n Tl-wr841nd

Dottie Lankard Jan 27, 2019 03:55:

I can no longer print from my computer via wifi using this router. However, I can print via wifi using this router with our I Pad and mobile phones. The error message I receive from my computer says to disable the privacy separator feature. I am unsure how to do this.
AHARON Jan 26, 2017 07:30:

JHHHHURDTYFFYGUYGYGJHG JHGHJGJGHJHG