Download  Print this page

TP Link TL-WR841N User Manual Page 23

Wireless n router.
Hide thumbs


Step 2: Choose Press the button of the new device in two minutes and click Connect.
Step 3: For the configuration of the wireless adapter, please choose Push the button on my
access point in the configuration utility of the QSS as below, and click Next.
If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the
network by PIN with the following two methods.
Method One: Enter the PIN into my Router
Step 1: Keep the default QSS Status as Enabled and click the Add device button in Figure 4-2,
then the following screen will appear.
Figure 4-3 Add A New Device
The QSS Configuration Screen of Wireless Adapter
Wireless N Router


Table of Contents

   Related Manuals for TP Link TL-WR841N

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments:
  • Dottie Lankard Jan 27, 2019 03:55:
    I can no longer print from my computer via wifi using this router. However, I can print via wifi using this router with our I Pad and mobile phones. The error message I receive from my computer says to disable the privacy separator feature. I am unsure how to do this.
  • AHARON Jan 26, 2017 07:30: