Download  Print this page

Wireless Advanced - TP Link TL-WR841N User Manual

Wireless n router.
Hide thumbs


to access for Filtering Rules.
3. Delete all or disable all entries if there are any entries already.
4. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-BE/00-0A-EB-00-07-5F
in the MAC Address field, then enter wireless station A/B in the Description field, while
select Enabled in the Status pull-down list. Finally, click the Save and the Back button.
The filtering rules that configured should be similar to the following list:

4.6.4 Wireless Advanced

Choose menu "Wireless→Wireless Advanced", you can configure the advanced settings of your
wireless network.
Beacon Interval - Enter a value between 20-1000 milliseconds for Beacon Interval here.
The beacons are the packets sent by the router to synchronize a wireless network. Beacon
Interval value determines the time interval of the beacons. The default value is 100.
RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet
is larger than the specified RTS Threshold size, the router will send RTS frames to a
particular receiving station and negotiate the sending of a data frame. The default value is
Figure 4-16 Wireless Advanced
Wireless N Router


Table of Contents

   Related Manuals for TP Link TL-WR841N

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments:
  • Dottie Lankard Jan 27, 2019 03:55:
    I can no longer print from my computer via wifi using this router. However, I can print via wifi using this router with our I Pad and mobile phones. The error message I receive from my computer says to disable the privacy separator feature. I am unsure how to do this.
  • AHARON Jan 26, 2017 07:30: